• ThePocketBeagle 2 Industrialis an update to thePocketBeagle 2 Rev A1SBC featuring 1GB DDR4 RAM, a 64GB eMMC flash, and industrial temperature range support. • The original board only comes with 512MB DDR4 memory, an eMMC flash footprint (unpopulated), and commercial temperature range support. • Apart from those changes, the other specifications remain the same, with a Texas Instruments AM6254 quad-core Cortex-A53 SoC, an MSPM0L1105 Cortex-M0+ microcontroller, a microSD card slot, a USB-C port, UART and JTAG debugging support, and two 36-pin GPIO headers. • Another difference is that the PCB is red for the PocketBeagle 2 Industrial (like theBeagleBone Black Industrial 4G), while the PocketBeagle 2 features a black PCB. • PocketBeagle 2 Industrial specifications: Main SoC -Texas Instruments AM6254CPUQuad-core 64-bit Arm Cortex-A53 @ 1.4 GHzArm Cortex-M4F real-time core @ 400 MHz with 256KB SRAMGPU - Imagination PowerVR Rogue AXE-1-16M with support for OpenGL 3.x/2.0/1.1, Vulkan 1.2; note: part of AM6254, but not listed in the board’s specifications, likely because there’s no video output.Dual-core Programmable Real-Time Unit Subsystem (PRUSS) running up to 333 MHzDedicated Device/Power ManagerSecurity - Secure boot and Trusted Execution Environment (TEE) supported CPUQuad-core 64-bit Arm Cortex-A53 @ 1.4 GHzArm Cortex-M4F real-time core @ 400 MHz with 256KB SRAM Quad-core 64-bit Arm Cortex-A53 @ 1.4 GHz Arm Cortex-M4F real-time core @ 400 MHz with 256KB SRAM GPU - Imagination PowerVR Rogue AXE-1-16M with support for OpenGL 3.x/2.0/1.1, Vulkan 1.2; note: part of AM6254, but not listed in the board’s specifications, likely because there’s no video output. • Dual-core Programmable Real-Time Unit Subsystem (PRUSS) running up to 333 MHz Dedicated Device/Power Manager Security - Secure boot and Trusted Execution Environment (TEE) supported Secondary MCU -Texas Instruments MSPM0L1105Arm Cortex-M0+ microcontroller running at 32 MHz with 32KB flash, 4KB SRAM, 12-bit ADC, etc… System Mem

Article Summaries:

  • PocketBeagle 2 Industrial is an upgraded version of the PocketBeagle 2 Rev A1 single‑board computer. It adds 1 GB DDR4 RAM and a 64 GB eMMC flash, and expands the operating temperature range to -40 °C to +85 °C, making it suitable for industrial use. The board keeps the Texas Instruments AM6254 quad‑core Cortex‑A53 SoC, an MSPM0L1105 Cortex‑M0+ MCU, USB‑C, microSD slot, UART, JTAG, and two 36‑pin GPIO headers. The PCB is now red, matching other industrial BeagleBone boards. The industrial variant sells for about $50 on Digi‑Key, roughly $20 above the $29.90 retail price of the standard PocketBeagle 2.
  • The PocketBeagle 2 Industrial is an update to the PocketBeagle 2 Rev A1 SBC featuring 1GB DDR4 RAM, a 64GB eMMC flash, and industrial temperature range support. The original board only comes with 512MB DDR4 memory, an eMMC flash footprint (unpopulated), and commercial temperature range support. Apart from those changes, the other specifications remain the same, with a Texas Instruments AM6254 quad-core Cortex-A53 SoC, an MSPM0L1105 Cortex-M0+ microcontroller, a microSD card slot, a USB-C port, UART and JTAG debugging support, and two 36-pin GPIO headers. Another difference is that the PCB is r

Sources: